V Hook 90 Degree Barbell Holder for 2x2 Power Racks

Name: V Hook 90 Degree Barbell Holder for 2x2 Power Racks
Brand: Valor Fitness
SKU: MB-E
Price: 57.00 USD
Availability: InStock

SKU: MB-E

$57.00

Shipping Included In Price

Description

Short Barbell Holder Set for BD-7 and BD-33 Power Racks

The Valor Fitness MB-E is a 2” Short Barbell Holder Set designed to enhance and provide added support to one’s home gym equipment. A 4.25” rubber lined striker pad, slanted at a 50-degree tilt, allows your bar a firm support when returning to, or from, a starting position. This added length, along with the degree tilt, allows the user to safely and cleanly return the bar to its original location.

Features and Benefits:

SECURE: Solid steel bar holders are welded to a 3-sided face plate for a secure grip on Valor Fitness BD-7 and BD-33 Power Racks. The solid 12-gauge steel rod is positioned completely through the main frame uprights, creating a safe locking mechanism.
HEAVY DUTY: Short Barbell Holder Set made from 12-gauge steel, the MB-E can safely support up to 750 lb for added insurance while lifting personal best limits.
UNIQUE DESIGN: Safety catch extends 5" from the power rack and is reinforced with rubber padding to absorb shock and better support the weight. 1.25 "steel end caps prevent bar from sliding or tipping off.
EASILY ADJUSTABLE: Safety bar extensions can be adjusted with just a turn of the wrist by rotating the extension 90 degrees to unlock. Find desired height, re-insert steel pin, and rotate back in place to lock.
ADDITIONAL: Sold as a pair. Please note that Valor Fitness accessories are designed to fit Valor Fitness products only. The MB-E is compatible with the BD-7 and BD-33 Power Racks.

Adjusting the Bar Holders is just a turn of the wrist. Rotate the holder 90 degrees, pull from current location, find desired location, insert Bar Holder pin into frame, rotate back 90 degrees. Confirm you have the correct adjustment before you start your workout.

MB-E short bar holders are 2" x 2" and will only fit the Valor Fitness BD-7 and BD-33 Power Racks. The Valor Fitness MB-G Short Bar Holders are 2.5" x 2.5" and will fit Valor Fitness BD-11, BD-20 and BD-41 Power Racks. Please note that all Valor Fitness accessories are designed to fit Valor Fitness products only. Max weight limit is 750 lb - sold as a pair.

Specifications

Size

Box Dimensions

Box 1/1: 10x8x5 (9lbs)

(LxWxH in inches)

Questions & Answers

Have a Question?

Ask a Question

The silver circular barbell holders that comes with the BD-7 power rack protrude out a lot. Are these J hook barbell holders shorter than the default barbell holders that come with the BD-7 power rack?

The MB-E are approximately the same size as the bar holders that come with the BD-7. They both measure approximately 5 inches in length, but with the slight angle on the MB-E you would save approximately 1/4 of an inch.
Can you explain why I would use these instead of the ones that come with the BD-33? there doesn't seem to be a J hook option for the BD-33 would these provide a similar benefit? thanks

It is a matter of personal preference, if you would prefer these to work similar to a J-hook rather than the bar catchers that comes with the rack.

My fault. Bought too small of a size for my rack.

I definitely recommend adding these to your power rack. I would buy these again for mine.

So far so good. I have the BD-7 and the bar holders that come with the BD-7 are too long and angle down so the bar rolls down. I ordered these and they seem to be much better. Took some getting used to placing these on the rack since their design they will be lower than the rack space you install them in. But once I got used to that I like these much better.

I ordered this short bar holder to go with the Valor BD-7 power rack. The bar holders that come with it were a bit too long and were metal on metal. These are a very nice addition to the equipment. Just the right size, has a rubber pad to avoid metal on metal contact and lifting off the bar is a bit easier due to the angle. In addition the original bar holders now free add to the number of bars that can be stored on the rack. Some people pointed out that the pad is just glued on and may come off. One - how else is it expected to be attached and two since the loading is always from the top I doubt it will come off. Even if it does i am sure I will be able to put some adhesive to put it back. Since it is made by the same company (Valor), I would suggest that they include this superior bar holder with the equipment to begin with.

These hooks are awesome. The angle really helps with unracking and re-racking the bar on bench presses, olympic lifts and Romanian deadlifts. High quality and very sturdy.